Weddingbee

I, like many other brides, fell in love with these escort card trees:

{image}

Since I decided to make these trees for our wedding I have had second thoughts because of stories like Miss Milkshake’s where guests were frustrated by not being able to find their cards. I just couldn’t dump this idea though because I was attached to it. Luckily, we are having a cocktail hour so guests should have plenty of time to find their card…well, at least I hope so. If not they can sit wherever they want, I don’t really care.I decided to make our cards out of the copper flashing that I picked up from a hardware store many months ago and back them with paper. I could have done something super fancy with the backs of the cards, but I didn’t want to make this already complex project even more time-consuming. Here is the final tree, with step-by-step instructions after the photo:

This is a shot of the tree with 34 cards hanging from the little branches. There will be three trees in all, and we are estimating that they will each need about 30 cards on them, but obviously we don’t have our final count yet. It’s a pretty full tree, so I may make 4, or I may just hope no one strangles me.Okay, now onto the how-to. (Sorry the photos are not great, copper is not easy to shoot in a dark room.)

This is the copper flashing I purchased from Lowe’s. It runs about $30 and I have quite a bit left.

The flashing is backed with some sort of paper. I don’t know what it is or why it is there, but I needed to remove it. When I just tried to peel it off it didn’t go well, like taking off a UPC bar code sticker. So, I tried warming the paper side of the copper with my hand for about 5 seconds (just by laying it on top) and it peeled off like magic! You may not have this problem, but our house was negative a thousand degrees when I first began this project.

Here I am working, all decked out in Mr. Pineapple’s sweatshirt trying to keep warm.Be careful not to actually touch the face of the copper. The oils on your fingers will create a permanent fingerprint on the surface. You can either wear gloves or just be care to touch only the edges and back that no one will see. I also worked on an old towel because the copper will mark very very easily.

After I decided the size I wanted the cards to be, I cut them out of card stock and backed them with double-sided adhesive. A Xyron would work great for this task, but unfortunately I bought mine a little too late. The cards are about 2″ x 2.5″ so I cut the copper to be a quarter-inch bigger all the way around, 2.5″ x 3″. Then, I peeled the adhesive off of the card stock and stuck it approximately in the center of the copper.

Next I cut off the corners all the way around.

Then I folded the copper over the card stock. It doesn’t have to be even all the way around because you will be covering it up anyhow.

Next I added a squirt of Tacky Glue. I chose Tacky Glue because I know it fondly from my childhood spent crafting. I remembered that it made anything stick, even when I glued lace onto a t-shirt (I was a fancy 5 year old, who made her own horrible shirts) and my mom washed it over and over. Another glue may work just as well.

Then I took a piece of ribbon and made a loop and stuck it in the glue. (I got the ribbon for $0.50 a spool a Michael’s.)

Finally, I added another piece of the card stock (backed with adhesive) to cover the mess and give the ribbon some extra hold.The result (Mr. Pineapple refers to them as little purses):

The next step will be to write the guests’ names on the cards with an extra fine point Sharpie paint pen. I bought a non-Sharpie one first because it was cheaper, but the tip was too thick:

This was just a test of the pen. For the final cards, not only will the writing be more delicate, but I will be doing something different for the table number and food choices. I’ll post the results once I start getting RSVPs back.A few more shots of the finished tree:

Harrison the cat looking for his escort card.

I got the Manzanita branches from Blooms and Branches online. They were the cheapest I found, but I don’t know that I would recommend them. There was no protective packaging in the box they were shipped in. Consequently, a lot of the little branches were broken off and the 3 main branches were tangled together. Plus they just weren’t that nice.

I found the containers on clearance at Michael’s for $4. The rocks are from my backyard.

What are you doing for you escort cards?

• Strawed
• Something That’s Be...