Weddingbee Blog

OK, so I know this isn’t exactly a vital DIY project, but I figured I should have something pretty to hang my wedding dress on for pictures. I keep seeing this image around the interwebs…

Image via lilafrances on Etsy

…and I wahahaaaant! But to me, $25 for a hanger is a little steep, so I made my own! And I decided to make them for my bridesmaids as well.

I found these nice wood hangers at Target, at about five dollars for five hangers, and I got a fine-point hot pink acrylic paint pen at Michaels for about three dollars. Here’s how I did it:

1) Pick a font (I used “HUNTSON” bolded). Type the names you want to use, and then print them out. Remember that a 72-point font is approximately one inch tall. (You may have to print a couple times to figure out what size fits. Not all fonts are sized equally.)

2) Tape your printout to the front of the hanger. With a ballpoint pen, trace around the edge of the font. Be sure to put a little pressure on the wood. This will leave a faint indentation in the wood.

3) Fill in the outline with your paint pen. A fine-point pen works better for thin fonts, but if you’ve got a wider font, a medium-tip pen will make the work go faster. Let the paint dry and then go over it again. Done!

Whatcha think? Here’s a better image of the paint color:

Side note: How WEIRD is it seeing your married name written out?! Every time I see it, all I can think is, “That’s FMIL Hyena’s name!” That’s going to take some getting used to.