DIY Wine Bottle Vases
I fell in love with these centerpieces but knew I could make my own DIY wine bottle vases.
Image via The Knot
They were quirky and different, and I loved how the uhule/fiddlehead fern scroll matched the scroll in our invites. There was just one problem…
Each centerpiece would use three vases, and cylinder vases add up! Currently they’re about $3.99 for the tallest one, but at $12 per table and multiplied by 13 tables, it just came to be too much. I also wanted many votives on the mantle to give the house a warm candlelight glow. While calculating these with my dad, he made the obvious suggestion: why not get a bottle cutter and create DIY wine bottle vases and votives?
I quickly found Ephrem’s bottle cutter here and purchased it. I figured the $40 would be worth it, as I’m always up to add another craft skill to my repertoire. I told my bridesmaids and friends to get drinking because we’d need a lot of wine bottles for this project, and many wine corks for another.
There is a less caloric and less liver-abusing option, though: Head to a wine bar and ask for their old bottles.
So with our cases of empty wine bottles in hand, we began the process.
Step 1: Clean the bottles and soak them to remove the labels. Some will peel off easily, some will scrape off, but you should NOT use the X-Acto knife. Otherwise, you’ll cut yourself like one of my MOHs did.
Step 2: Score the bottles using the bottle cutter. I had my dad do this because he is handy, and the sound of scoring glass is equal to nails on a chalkboard. Remember to maintain pressure on the bottle toward the back end of the bottle cutter. The lines should be even and match up with each other at the end.
Step 3: Get in touch with your inner pyromaniac. Slowly rotate the scored line of the bottle over a candle flame. Maintain inward pressure on the bottle (gently gripping and pushing the neck and the dimple/bottom rim toward the center). MOH MB had a great system of two sloooow rotations over the flame combined with step four.
Step 4: Break out the ice. Take an ice cube and quickly make your way around the scored edge to quickly cool the bottle.
Step 5: Repeat steps three and four as necessary. Often the bottle will sort of slide off the edges.
Here is the finished product!
This takes a fair amount of patience. DO NOT try to force the bottle. You’ll end up with rough edges, glass shards, and a ruined bottle. Bottles range in thickness, so some bottles will be easier than others. Seriously, only tackle this project if you are either A) blessed with patience or B) willing to learn patience. (After my second broken bottle, I learned!)
I recommend only tackling a case of DIY wine bottle vases at a time, because it does get tiring and they add up over time. The darker colored ones will be used as votives with a floating candle in them for the mantles, and the clear ones will be centerpieces.
I’m excited because I don’t think I’ll ever buy a votive holder again. “Found” elements are important to me, and I’m glad I could give these bottles a second chance at life!
Are you planning on DIYing your centerpieces? Will you try to make your own DIY wine bottle vases?