Save the Dates, Part 1: Yeah, B*tch, Magnets!

When it came time to put together save the dates, the ever-popular magnets seemed like a natural choice for us. For one thing, I knew we’d be sending them out kinda early (like, a-year-before-the-wedding-date early) because Cape Cod is a crazy place where last-minute vacations go to die thanks to thousands of people booking their hotel rooms months in advance. I wanted to make sure that everyone had plenty of time to book their travel and their accommodations, but I also knew that, if our guests were anything like us, a postcard or card was likely to get lost in the great post-holidays Christmas card refrigerator door purge. (OK, let’s be real: If they were *really* like us, Christmas cards would stay on their fridge, ignored until the next year, when they go to put the latest batch of cards up there and realize they still have their 2013 cards up. But I digress.) So, long story short, our save the dates needed to go up there and stay up there. Point one for magnets.

And, for another thing, brainiac Mr. Hammer feels the same way Jesse Pinkman does about magnets:

So, there you had it. Magnets it was.

My next dilemma? Finding the right size magnet. I’d snatched up a $27-for-$70 Groupon to Vistaprint in May (like a clingy boyfriend, those things are always around, so keep an eye out if you’re in the market), so I knew I’d be ordering from them, and they have two options: business card (about 3.5? x 2?) and postcard (about 5.5? x 4.25?). Case closed, right?

Nahhhh. See, I thought the business cards would be too small for all the information to be legible once I added an engagement photo. But the postcards just seemed too big to me. So what was I to do? Overcomplicate, of course! I decided the postcard magnet cut in half crosswise would be juuuuust right. Vistaprint’s customer service rep tried to convince me not to do this, saying that cutting the magnets would make them lose their magnetism, but aforementioned magnet nerd Mr. Hammer said it would do no such thing—and by that point, there was no dissuading me.

So, I picked juuuust the right photo (are you sensing a theme here?): one of the locker photos, which hinted at our high school past, with the lockers forming “white space” over about half the photo where I could place text without worrying about it interfering with our faces. In PowerPoint (so profesh), I cropped the photo to half the size of a postcard magnet, added a 50% opacity white rectangle over the lockers to make the text just a bit more legible, and added the text over that.

slide14

Then, I saved it as a JPG, opened *another* PowerPoint slide that was the size of a full postcard magnet, and lined up two of the half-sized JPGs on that. I saved *that* PowerPoint as a JPG and uploaded it to Vistaprint for my final order.

hammer1

(I lined them up so the bottoms were touching (teehee), figuring that that would make it easier to see where to cut them.)

Turned out, my $70 Groupon was juuust enough to cover 70 postcard magnets, which was enough to cover all the save the dates I needed, plus an extra 20 or so for screw-ups (number one rule for my DIY projects is to *always* order a buffer).* When I got my 50-pound box from Vistaprint (seriously, who knew magnets weighed so much?), I got to work.

I decided to use an X-Acto knife to cut these up, since I figured cutting through magnets would probably dull the blade, and better to have that happen with an X-Acto knife, where I can easily switch out the blades, rather than with scissors, where God knows what I’d have to do to get those sharp again. (I hear cutting several layers of aluminum foil works for that, actually, but I’ve never tried it myself.) Plus, I thought it’d be easier to get an obsessively straight line if I used a straight edge and an X-Acto knife.

img_23071

I sat down with my BFFL quilter’s rule, X-Acto knife, magnets, and self-healing mat. I lined the ruler up with where I was going to cut, and lightly scored the X-Acto knife down that line. Then, I scored it again. And again. And again. I figured this was a better way to get a precise cut than bearing down on the knife—plus, I knew my hand would be killing me and I’d probably slip and hurt myself if I pushed too hard. It was tedious, but not all that difficult; I usually did about 20 magnets in a sitting so my cutting hand wouldn’t get too sore, and it probably took me less than 30 minutes to get through each set.

Then, I tested each and every magnet on our fridge to make sure I hadn’t messed with the magnetism. Spoiler alert: I hadn’t—although I can’t vouch for this working with the scissors approach (but Mr. Hammer claims results shouldn’t vary if you go that route).

hammer2

So, at long last, my magnets were ready to go! But I wasn’t about to stick ‘em in an envelope and call it a day. Oh, no. I was just getting started…

*Helpful hint: Vistaprint’s ordering increments jumps from 50 to 100, so if you want to order, say, 70 or 80, you have to add 50 to your cart, then go back like you’re making a whole new magnet, upload the same design, and add 20 or 30 of *that* upload to your cart before checking out.

BLOGGER

Mrs. Hammerhead

PREVIOUS POST
Cala-Married: Church Ceremony Details
NEXT POST
Classifieds: March 26, 2015
Add a comment

comments

  1. Member
    LoveMyBrit 761 posts, Busy bee @ 1:36 pm

    Love them! Great idea to use the locker photo since it includes a pre-made area for words 🙂

    I had to laugh at the magnetism bit… There’s no type of cutting you can do to make the magnets not work 🙂 You could cut each postcard into 100 tiny pieces, and each of those would still work as a magnet! The customer rep was probably just trying to get you to order more and thus spend more money.

  2. Member
    GeliBee 477 posts, Helper bee @ 8:46 pm

    I love yours! I just ordered my Vistaprint magnets yesterday, but we decided the large postcard size was perfect. I can’t wait to see them! Those Groupons are a life-saver 🙂

  3. mscrab Bee
    Mrs. Crab 60 posts, Worker bee @ 9:12 am

    Oh the Vistaprint rep, clearly not a Physics major 🙂 These are adorable! This is a great example of making it work!

  4. tractor Bee
    Mrs. Tractor 32 posts, Newbee @ 5:35 pm

    I love the photo you chose – too perfect!

  5. pyramid Bee
    Mrs. Pyramid 104 posts, Blushing bee @ 5:33 am

    I’m highly amused/disturbed by the loss of magnetism suggestion! Um…nice try, customer service?

    Either way – these turned out cute! The photo choice with the blank space was a perfect choice!

  6. hammerhead Bee
    Mrs. Hammerhead 0 posts, Wannabee @ 6:23 pm

    Ha, yes, I vaguely remembered learning about cutting and magnetism back in middle school science class, but I literally have not thought about it since then. Luckily, Mr. Hammer cares a whole lot more about magnets on a day-to-day basis than I do!

add a comment

Sent weekly. You may unsubscribe at any time.

Find Amazing Vendors